Correct placement
Wrong placement
Wrong placement
BEFORE FIRST USE
1.
Remove any sticker or protective foil from the soleplate.
2.
Fill the water tank with water and heat up the iron at the maximum temperature, and
then iron over a piece of damp cloth for several minutes for the purpose of removing any
residue on the soleplate according to the section of “
Steam ironing
”.
NOTE
:
(1) It is normal that strange odor comes out from the unit for the first use. This will cease
after a short while.
(2) Some particles may come out of the soleplate when you use the iron for the first time.
this is normal, the particles are harmless and stop coming out of the iron after a short
while.
USING YOUR STEAM STATION
The appliance has two ironing ways. You can use dry ironing or steam ironing, the details
refer to the following.
Dry ironing
1.
Put the unit base on a stable and level surface.
2.
Put the iron on the thermal insulation stand of unit base correctly (see Fig.3).
3.
Connect the plug to wall outlet, and then turn the temperature dial to select your desired
temperature setting, which is depended on the fabric of garment. Refer to
“
IRONING TIPS
”
and
“
ADDITIONAL TABLE
”
as below when select temperature.
4.
And then the temperature indicator illuminates and the iron starts heating.
5.
When the temperature of soleplate reaches the selected temperature, the temperature
indicator turns off, and you can start ironing now.
WARNING:
Never touch hot soleplate at any time before cooling down!
Summary of Contents for SP1031
