Center
Center
Passenger Side
Driver Side
Q-RVF15: Ford F-150 (2015+)
NOTE: Universal Base bracket can also be added for additonal lateral and/or forward adjustment if necessary.
8
SpeedTech Lights, Inc © 2020
RAPTOR
®
LINEAR STD
MULTICOLOR VISOR LIGHT BAR
NOTE: Mounting the lightbar by attaching the forks directly to rear track may position the unit too far away from the
windshield in certain vehicles. If this is the case for your vehicle, see below alternate mounting instructions using the (4) Base
brackets:
1. Take the (4) Philips pan head short bolts and attach the (4) Base brackets to the mounting holes on the bottom of the unit using the
(4) flat large diameter washers and (4) large diameter split lock washers.
2. Choose any combination of long and/or short forked visor brackets and align them so that the screws line up with the tracks of the
Base bracket.
3. Attach the forked visor brackets to the Base bracket using the (8) Philips pan head scews, (8) split lock washers, (8) hex nuts and
(8) flat washers.
4. Now you will be able to adjust the unit laterally as well as front to back in order to position the forks to line up with your visor joints
NOTE: All vehicle specific brackets attach via the back track using the included hardware. See exhibits below:
