Page of 8
6
4. If necessary, adjust spring tension on reel by adding or removing wraps of
hose from spool, one wraps at a time, until desired tension is obtained. Add
wraps to increase tension. Remove wraps to decrease tension.
Note: To avoid damage to the reel, always hold on to the cable while it is
rewinding.
Maintenance
Make sure the hose is in proper working order and that the insulation is not cut or
worn as this could represent a hazard and jeopardize operation.
Clean the hose with a cloth dipped in warm water to remove dirt or deposits and
ensure correct rewinding.
Do not use detergents or solvents which could prove incompatible with
cable-winder materials.
If the event of having to perform maintenance on the electrical, mechanical parts
or replace the cable, contact an authorized after-sale service center.
Dismantling of the unit by unskilled personal could prove hazardous; the risk
involved mainly concern the preloaded springs.
Limited Warranty
1. The manufacturer warrantees this hose reel against defects in material and
craftsmanship, for a period of 12 months from date of purchase.
2. Manufacturer
’
s liability is limited to replacement or repair of defective material
within the warranty period, when returned freight prepaid to the distributor or
their designated service depot.
3. The warranty does not cover damage caused by accident, misuse or faulty
installation.
4. The reel must be installed and maintained in compliance with the instructions.