76
1.
Press
key
■
repeatedly until the text
Auto
starts flashing.
2.
Press
key
▼
three times to select programming mode
Prog
.
3.
Press
key
▼
to confirm programming mode.
4.
Press
key
▼
to confirm events programming
.
5.
Press
key
▼
to select events modification
MOD
.
6.
Press
key
▼
to confirm events modification.
7.
Press
key
▼
or
▼
to select the event to modify. Events are displayed
chronologically according to the order in which they are performed, starting from
the most recent; press
▼
to move to the next event, or
▼
to move to the previous.
From this point onwards, modifications are performed according to the same procedure as described for programming
a new event (see chapter 5.2.1) and all properties can be modified or confirmed individually as required. After modifying
and confirming the last parameter, the event is memorised again and SRCW 06T is ready for modification of another
event, in which case proceed from point 16 of this table.
5.2.2) Programmazione: modifica eventi MOD
All programmed events can be modified at any time. Before modifications, an event must be located and selected
from all those present.
... Auto
8.
Press
key
▼
to confirm the selected event.
or
1.
Press
key
■
repeatedly until the text
Auto
starts flashing.
2.
Press
key
▼
three times to select programming mode
Prog
.
3.
Press
key
▼
to confirm programming mode.
4.
Press
key
▼
to confirm events programming
.
5.
Press
key
▼
twice to select event deletion
DEL
.
6.
Press
key
▼
to confirm event deletion.
7.
Press
key
▼
or
▼
to select the event to delete. Events are displayed
chronologically according to the order in which they are performed, starting from
the most recent; press
▼
to move to the next event, or
▼
to move to the previous.
After deleting an event, SRCW 06T is ready for subsequent deletion of another event; in this case proceed from point
N°6 of this table.
5.2.3) Programming: deleting events DEL
All programmed events can be deleted at any time. Before deleting, an event must be located and selected from all
those present.
... Auto
8.
Press
key
▼
to confirm the selected event.
9.
Press
key
▼
to confirm deletion of the selected event. To exit without deleting,
press
key
■
and resume the procedure from point 7 in this table.
or
Table 25
Modifying an event: Example
Table 26
Deleting an event: Example
www.stobag.com
SKIMY_SRCW_06T.indd 76
SKIMY_SRCW_06T.indd 76
1.3.2010 11:07:40 Uhr
1.3.2010 11:07:40 Uhr
