8
Diagnosis
ID 442233.05
WE KEEP THINGS MOVING
Operation manual
42
Reading the fault memory requires an online connection. It is opened in the
inverter entry under
Diagnosis\Fault memory
. The display of the fault memory is
updated when it is opened.
8.2
Free Parameter list
The free parameter list is used to indicate and change a selection of parameters
adjusted to the application. The list is opened in the inverter entry under
Commissioning/Free parameter list
. The following screen appears:
Fig. 8-2 Free parameter list
To enter a parameter in the list, its coordinates must be entered in the field
coordinate
. With a global parameter, the letter of the group and its number (e.g.,
A10
) is sufficient. When an axis parameter is to be inserted, the axis no. must be
stated (e.g.,
3.I09
: Parameter
I09
from axis 3).
Parameter elements can also be entered (e.g.,
A10.1
).
If the parameter is not entered correctly in the field, it is not accepted.When the
free parameter list is open while a picture is being read with the Scope
functionality, the parameters entered in the list are included with the current
values when the picture info is written.
In order to use a free parameter list which has already been compiled in other
projects, you can export the list (
Export
button) and save it in the *.fpl file format.
In another project, you can press the
Import
button, then select the *.fpl file so that
you can display the same parameter collection in the list.
8.3
Simubox
Simubox can be used to monitor the display on the PC and to press keys. This
makes it possible to perform commissioning in local mode, for instance, when the
inverter is installed in an inaccessible place.
