User Instructions
www.stockmastereurope.nl
Design Purpose and Safe Operation
S
tockmaster Navigator
This product has been designed as a general purpose mobile platform ladder where an elevated work platform is
required, together with highly flexible mobility to allow the ladder to navigate in confined spaces. Typical use is
placement or retrieval of small light - weight items from racking or shelving, or retrieval of larger or heavier items
which do not require carrying down the ladder. An example is the selection of car tyres in a tyre retailer, when the
tyre may be selected and allowed to fall safely to the ground. DO NOT CARRY HEAVY OR LARGE ITEMS UP OR
DOWN THE LADDER. When fitted with a Platform Safety Gate (Navigator Pro) always ensure the gate is securely
latched before use. When fitted with a Side Opening Platform Gate (Navigator Pro) always ensure the gate is
returned to the lock position and securely latched after use.
S
tockmaster Tracker
This product has been designed as a general purpose mobile platform ladder where an elevated work platform
is required, typically for maintenance and process inspection purposes as found in manufacturing. In the mobile
state, the platform surface is inclined from the horizontal and therefore THE LADDER MUST NOT BE USED TO
MOVE LOADS. Care must be taken to remove tools etc. from the platform surface before moving the ladder. A
safety device has been fitted to the ladder which removes the wheels from ground contact to prevent it from
moving towards the operator should it be lifted over centre. When moving the ladder, do not lift the Control
Handle above waist height as this will actuate the safety device and prevent forward movement of the ladder. DO
NOT REMOVE THIS SAFETY MECHANISM. When fitted with a Platform Safety Gate (Tracker Pro) always ensure the
gate is securely latched before use. When fitted with a Side Opening Platform Gate (Tracker Pro) always ensure the
gate is returned to the lock position and securely latched after use.
S
tockmaster LIFT -TRUK
In addition to highly flexible mobility, this product has been designed for placement and retrieval of items from
racking or shelving and includes a lifting table for vertical conveyance of goods. Consistent with safe work
practice for manual handling, the ladder should not be used for single items exceeding 20 kg and THE TOTAL
LOAD ON THE LIFT TABLE MUST NOT EXCEED A MAXIMUM OF 60 kg.
When using the lift table;
·
Always lower the Lift Table before moving the ladder
·
Check that stacked loads are stable before moving the Lift Table
·
Keep the load centred on the Lift Table
·
When using the Lift Table with small items, place them in a suitable load bin.
S
tockmaster Step -Thru
This product has been designed to provide mobile passageway where access to an elevated work area is required,
typically for access onto truck trays or mezzanine areas. The platform is designed to provide passageway only and
is NOT TO BE USED AS A WORK PLATFORM.
·
ENSURE THAT THE PLATFORM HEIGHT IS NO HIGHER THAN THE LEVEL TO BE ACCESSED. The correct
platform height is up to one step lower than the level to be accessed.
·
ENSURE THAT THE REAR OF THE PLATFORM MAKES CONTACT WITH THE LEVEL TO BE ACCESSED
In the mobile state, the platform surface is inclined from the horizontal and therefore THE PLATFORM MUST NOT
BE USED TO MOVE LOADS. A safety device has been fitted to the ladder which removes the wheels from ground
contact to prevent it from moving towards the operator should it be lifted over centre. When moving the
Ladder, do not lift the Control Handle above waist height as this will actuate the safety device and prevent
forward movement of the ladder. DO NOT REMOVE THIS SAFETY MECHANISM.
Back
