User Instructions
www.stockmastereurope.nl
Maintenance and Routine Inspection
W
hen Assembled correctly, little maintenance is required. It is however advisable to regularly inspection the unit
to maintain safe operation. The following items should be taken into account.
·
Check that the stiles/legs (uprights) are not bent, bowed, twisted, dented, cracked or corroded;
·
Check that the stiles/legs around the fixing points for other components are in good condition;
·
Check that fixings (usually rivets, screws or bolts) are not missing, loose, or corroded;
·
Check that rungs/steps are not missing, loose, excessively worn, corroded or damaged;
·
Check that the side tube brace stays, back rails and corner braces are not missing, bent, loose, corroded or
damaged;
·
Check that ladder feet / end caps are not missing, loose, excessively worn, corroded or damaged;
·
Check that the entire ladder is free from contaminants (e.g. dirt, mud, paint, oil or grease);
·
Check that Auto-Gate and/or Rota-Gate (if fitted) locking catches are not damaged or corroded and function
correctly;
·
Check that the platform has no missing parts or fixings and is not damaged or corroded
I
f any of the above checks cannot be fully satisfied, DO NOT USE the ladder.
Weights, Dimensions and Size Selection
**D
enotes Ballast Required
3 Step
4 Step
5 Step
6 Step
7 Step
8 Step
9 Step
10 Step
0.8 M
1.1 M
1.4 M
1.7 M
2.0 M
2.2 M
2.5 M
2.8 M
24KG
26KG
28KG
32KG
34KG
38KG
41KG
43KG
Step-Thru
MODELS
EN131.1
SIZE | HEIGHT | WEIGHT
4 Step
5 Step
6 Step
7 Step
8 Step
9 Step
1.1 M
1.4 M
1.7 M
2.0 M
2.2 M
2.5 M
62KG
66KG
70KG
74KG
81KG
86KG
** Ballast Required
Lift-Truk
MODELS
EN131.7
SIZE | HEIGHT | WEIGHT
3 Step
4 Step
5 Step
6 Step
7 Step
8 Step
9 Step
0.8 M
1.1 M
1.4 M
1.7 M
2.0 M
2.2 M
2.5 M
31KG
37KG
39KG
41KG
44KG
48KG
51KG
** Ballast Required
Navigator | Tracker
MODELS
EN131.7
SIZE | HEIGHT | WEIGHT
Back
