User Instructions
www.stockmastereurope.nl
Inspection and Initial Testing
O
n completion of the assembly and BEFORE USING, do the following
·
Check that all fastenings have been tightened.
·
Check that the locating brackets are firmly fixed to the building structure.
·
Pull the MEZZALAD out to the use position. Check that both Ladder feet are in ground contact and that the
angle of incline of the Ladder to the ground is not more than 70 degrees (steps parallel to ground) and not
less than 60 degrees (steps with slight 10 degree tilt forward).
·
Push the MEZZALAD back to the store position and check that it remains captive by the locating brackets.
Maintenance and Routine Inspection
W
hen Assembled correctly, little maintenance is required. It is however advisable to regularly inspection the unit
to maintain safe operation. The following items should be taken into account.
·
Check that the stiles/legs (uprights) are not bent, bowed, twisted, dented, cracked, corroded or rotten;
·
Check that the stiles/legs around the fixing points for other components are in good condition;
·
Check that fixings (usually rivets, screws or bolts) are not missing, loose, or corroded;
·
Check that rungs/steps are not missing, loose, excessively worn, corroded or damaged;
·
Check that the diagonal tread braces are not missing, bent, loose, corroded or damaged;
·
Check that guide brackets are not missing, damaged, loose or corroded and engage properly on the mating
stile;
·
Check that ladder feet / end caps are not missing, loose, excessively worn, corroded or damaged;
·
Check that the entire ladder is free from contaminants (e.g. dirt, mud, paint, oil or grease);
I
f any of the above checks cannot be fully satisfied, DO NOT USE the ladder.
Weights, Dimensions and Size Selection
VH01 2.330 - 2.529 19.3KG
MODEL SERVICE HEIGHT WEIGHT
VH02 2.529 - 2.744 20.2KG
VH03 2.744 - 2.977 22.7KG
VH04 2.977 - 3.225 23.6KG
Back
