8
www.stockmastereurope.nl
Instalation
IMPORTANT
:
To avoid assembly problems follow these instructions exactly.
Step 1
-
Stand the Mezz-a-Lift into position placing the upper Floor Support Angle on the upper landing in the
required position. With someone supporting the unit, mark the fixing positions A1 - A3 in the upper landing thru the
Floor Support Angle. Drill and fix at these locations with appropriate fixings.
Fixings not supplied
(See illustration No. 1)
Step 2
-
Using a Spirit Level, level the Mezz-a-Lift front to rear and side to side (See illustration No. 2)
Step 3
-
Mark the fixing positions B1 - B4 in the lower floor thru the Base Bracket. Drill and fix at these locations
with appropriate fixings.
Fixings not supplied
(See illustration No. 3)
Step 4
-
Tighten ALL fasteners now
90
°
Illustration 1
Illustration 2
A1
A3
A2
