10
www.stockmastereurope.nl
IMPORTANT
:
To avoid assembly problems follow these instructions exactly. Work Safely -
This assembly is
done with the Stockmaster standing upright.
Step 1
-
Fix the Handrail to the Platform Kickrail. Slide the Handrail into the Kickrail and rotate the handrail so that
the lower end is over the Step. Place an M6 x 40 bolt through the bottom hole at the front of the Kickrail and fit a nut
Finger tight only.
(See illustration No. 1)
Step 2
-
Fix the Handrail to the Step. Place an M6 x 40 bolt through the Handrail and fit the nut under the Step.
Check that the Handrails are correctly aligned and tighten all four bolts using the Hex Key and Double Ended
Spanner.
(See illustration No. 2)
Step 3
-
Illustration No. 3 shows completed Handrail assembly.
Illustration 1
Illustration 2
M6 x 40
M6 x 40
