8
www.stockmastereurope.nl
Illustration 1
Illustration 2
“E” Pin
Upper Mounting
Angle Hole
IMPORTANT
:
To avoid assembly problems follow these instructions exactly. Work Safely -
This assembly is
done with the Stockmaster standing upright.
Step 1
- Stand the Ladder upright.
Position the Control Handle in the Step Frame between the 2nd and 3rd steps.
(See illustration No. 1)
Step 2
-
Fix the Control Handle to the Frame. Pass an “E” Pin through the hole in the Control Handle and the Upper
hole in the Mounting Angle of the Step Frame. (See illustration No. 2)
Step 3
-
Secure with an “E” Clip fitted to the outside ring of the “E” Pin.
(See illustration No. 3)
