Page 35
Due to continuous product research and development,
the information contained herein is subject to change without notice.
www.stoddart.com.au
www.stoddart.co.nz
To set the Core Probe temperature:
A. Select Core probe
B. Touch the value field to set the core probe
temperature
C. Turn the navigation dial to adjust the
temperature value
D. Press the navigation dial to save the set
value
4.3.6 Core Probe:
• Core probe:
the cooking cycle stops automatically when the temperature measured by the probe inside the food reaches the set value.
The core probe connection is on the underside of the control panel
Note:
When not in use, place the probe back into the magnetic support on the left side of the oven.
At the end of the cooking cycle, take care to remove the probe from the core before taking the tray out of the oven. The core probe is very
sharp and it reaches high temperatures after cooking, do not pull the probe by the connection wire to remove it.
Do not insert the hot probe in frozen food to prevent thermal shock to the probe, which can cause the probe to become damaged.
SET
PUSH
D
C
B
A
4.0 Operation
