Maintenance
11/12/2017
KSV 1000
29
Check the condition of the engine's airfilter, replace it if necessary.
Check the engine's oil, refill if necessary.
Check if machine is damaged or impaired in any way.
Check condition of dust filter and clean if necessary.
Empty dust container.
Search brush - roller tunnel for jammed particles and seized up
dirt that may narrow the brush tunnel and obstruct free roller
brush movement.
5.9.2
After each 50 operating hours also
Check if battery leaks acid.
Clean and grease battery poles.
Check if sweeping rollers are worn or cluttered. Replace if re-
quired.
Check sweeping contour, readjust if required.
Check if side brush adjustment is worn, if required readjust or re-
place.
Cleaning the frictional wheel and the driving belt (with nitro-
thinner, benzene or brake cleaner).
5.9.3
After each 100 operating hours also
Check cable isolation, replace cables if required.
Check if cable connections are tight.
Clean dust filter, replace if necessary.
Search suction for obstacles, clean.
Conduct trial run to check all operating elements.
Check if roller drive chain is elongated or loosened.
Check all bearings for wear.
Check if seals are damaged or dislocated.
5.9.4
After each 200 operating hours also
Check for proper functioning of the engine.
Observe the maintenance instructions provided by the manufac-
turer of the motor.
Summary of Contents for KSV 1000
Page 2: ...2 KSV 1000 11 12 2017...
