background image

 

Page 2

 

1. Safety Information: 

 
Application: 
Before use, check that the unit and operating equipment are in perfect condition 
and are safe to operate. Do not use the unit if it is not in perfect condition. 
This sweeping and suction machine is intended exclusively for operation on solid, 

level, and dry surfaces with an inclination not exceeding 2%. 
 
Do not sweep up/draw in burning or glowing objects.  
This unit must not be used for removing dust which is hazardous to your health 
unless specifically indicated on the unit. Comply with the safety information in the 

operating instructions! 
This unit is only suitable for use on surfaces indicated in the operating instructions.  
The machine may only be used on surfaces approved by the company or its repre-
sentatives.  

It is not permitted to remain in a dangerous area. It is forbidden to operate the unit 
in potentially explosive locations. 
 
Operation: 
The operator must use the unit in accordance with the regulations. He/she must 

take the local conditions into account during operation and be aware of other 
people, especially children, when operating the unit.  
The unit may only be used by authorised persons who have received training or 
have demonstrated their ability to operate the unit.  
The unit must not be operated by children or minors. 

 
The unit must never be left unsupervised while the motor is running. The operator 
may only leave the unit when the motor has been switched off, the unit has been 
secured against unintentional movement and, if required, the parking brake has 

been actuated and the ignition key removed.  
Do not reach into or under the machine under any circumstances when the motor 
is running. 
The hood latch should remain secured in the closed position except when perform-
ing maintenance work. 

 
Transport: 
Switch off the motor and secure the unit before transporting. 
 
Maintenance: 

Switch off the motor and if necessary remove the ignition key prior to cleaning and 
maintenance work, replacing components or changing over to another function. 
 
Remove the battery plug or disconnect the battery before working on the electrical 
system of battery-operated units.  

Do not spray clean the unit. 
Repairs may only be carried out by authorized customer service centers or by spe-
cialists in this fields who are familiar with all of the relevant safety regulations. 
 

Commercial units which may be used in different locations are subject to a safety 
check according to VDE 0701.  
 
 
 

 

Summary of Contents for Tandem 900 KSE










Reviews: