5
User Configuration Chart
Note the decal with this User Configuration on the bottom of the StompLight® for easy recall.
#
On/Off
switch
Mode
switch
Color switch
Description / Available Modes
1
On
Off
Off
Restores factory settings
2 Off
On
Off
Activates Slave / DMX Client mode
3 Off
Off
On
Disables the LED Array
4
On
Off
On
Color Wheel, Solid Color and Instrument
Instrument Modes
5
On
On
Off
Color Wheel and Solid Color Modes
6 Off
On
On
Strobe Mode disabled
How to connect your StompLight® with another Product
With a StompLight Pal or Pals
1.
Stage your Pro and Pal(s).
2.
Power up the StompLight DMX Professional effect pedal.
3.
Locate the
DMX out
connector on the rear panel of StompLight DMX Pro. Using DMX 3-pin
cable, “daisy chain” you’re StompLight Pal(s) via the in/out DMX connectors on each unit. Mic
cables will work if you do not have DMX 3-pin cables.
4.
Power up your StompLight Pals using the included StompLight® power adapters or the
rechargeable StompLight Power Banks.
5.
Turn on the lighting on the StompLight Pro and scroll through the Modes. Whatever lighting
you choose and whatever adjustments you make will be replicated on each of the StompLight
Pals.
With a StompLight DMX Pro as the Controller and additional StompLight DMX Professional effect
pedals as Slaves/Clients.
1.
Stage your StompLight®
2.
Choose which StompLight DMX Professional effect pedal will be the Controller and power it
up.
3.
Locate the
DMX out
connector on the rear panel of the StompLight DMX Pro you selected as
the Controller. Using DMX 3-
pin cable, “daisy chain” the additional StompLight DMX
Professionals and StompLight Pal(s) via the in/out DMX connectors on each unit.
