866-795-1586 • WWW.STONEAGETOOLS.COM
16
4” BADGER DISASSEMBLY
Figure 2: For Step 4
BAE 017
Retaining Ring
BAE 015
Inner Disc (4)
BAE 016
Outer Disc (3)
BAE 010
O-Ring (3)
Figure 3: For Step 5-6
4. Use a small pick to remove the Carbide Seat
and H.P. Seal from the bore of the Shaft.
BAE 181
Wrench
Shaft /Bearing
Assembly
RJ 011-C
Carbide
Seat
RJ 012-TO
H.P. Seal
5. Use a small screw driver or pick to remove
the Retaining Ring from the shaft.
6. Pull the Discs and O-Rings
off of the Shaft.
DISASSEMBLY
1. Use an adjustable end or BAE 181 wrench
on the flats of the Nut and remove it from the
Head.
2. Slip off the Wear Ring.
3. Lift the Shaft Assembly out of the head.
Figure 1: For Steps 1-3
BAE 030
Wear Ring
BAE 002
Nut
BAE 040-R
xx
Head
Shaft, Bearing,
Carbide, HP Seal,
and
Disc Stack
