18
866-795-1586 • WWW. STONEAGETOOLS.COM
DESCRIPTION OF EQUIPMENT AND INTENDED USE (TR-200):
The Torus TR-200 3D Tool is designed for cleaning tanks, vessels, autoclaves, ducts and reactor interiors.
The tool is capable of working pressures up to 15,000 psi (1035 bar) and flow rates of 50 to 220 gpm. The
wide range of flow rates is accommodated by the use of seven different manifolds; each is engraved with
its corresponding offset (i.e. R30). A maintenance-free magnetic brake is used to control rotation speed.
Note that rotation speed may increase as the tool warms up to operating temperature. The complete Torus
cleaning cycle varies from about 10 to 88 minutes of operating time depending on rotation speed, which is
determined by pressure, flow rate, nozzle diameter, manifold choice and brake setting. A uniform jet pattern is
achieved after 440 revolutions of the manifold shaft (136 revolutions of the body) and is recommended for most
applications. The tool can continue to run, thus generating a finer jet pattern. A complete cleaning cycle is
1426 revolutions of the manifold shaft (441 revolutions of the body). The HP manifold shaft revolves 3.23 times
for each body revolution. When used in large vessels, extension arms up to 36 inches long can be used to
reduce the jet standoff distance. The Torus can be hung from the high pressure water hose or by the optional
pulling ring available for the tool. It is recommended to blow out all internal water passages (nozzles, weep
holes, inlet) with compressed air after each use.
TORUS TR-200 DESCRIPTION AND INTENDED USE
Summary of Contents for TORUS TR-130
