7
866-795-1586 • WWW.STONEAGETOOLS.COM
INLET ADAPTERS:
The inlet adapters are all female-female couplings. One end is an O-ring face seal that seals to the inlet shaft.
The other end is available in 3/4” NPT, 1” NPT, 3/4”medium pressure or 1” medium pressure.
SPEED ADJUSTMENT:
The rotation speed of the Torus may be adjusted using the speed adjustment shaft located at the opposite
end from the inlet. The shaft may be set at any location between slow and fast. Any suitable tool may be
used to adjust the speed by inserting the tool through the access slot on the housing and into the hole in
the shaft. To change from slow to fast, turn the speed adjustment shaft approximately 50° to the left. Marks
are engraved on the outside of the body to indicate slow and fast settings. Changing the speed from slow
to fast will increase speed by approximately three times (i.e. slow 10 rpm; fast 30 rpm). The rotational speed
depends on the torque produced by the operating pressure, flow, manifold version and brake setting. The
average operating speed range of the cross-shaft is approximately 8-16 rpm on slow and approximately
25-50 rpm on fast.
TORUS TR-130 OPERATION
Speed Adjustment Shaft, 5/16”
diameter hole for adjusting tool
(Shown in the fast position)
Speed Adjustment arrow for slow
and fast settings.
Coupling Options
TR 230-P12 = 3/4” NPT
TR 230-P16 = 1” NPT
TR 230-MP12 = 3/4” Medium Pressure
TR 230-MP16 = 1” Medium Pressure
WS 210
O-Ring
Inlet
Shaft
NOTICE
Note: It is not necessary to remove the optional Pulling Ring Assembly to access the Speed Adjustment
Knob.
Summary of Contents for TORUS TR-130
