20
Initial Configuration
and virtual channel ID (VCI) settings according to the information
that you have received from your service provider.
4.
Highlight the
Mgmt
column and press the spacebar on your
keyboard to select the correct interface for contact with the
Management Server.
5.
Highlight
Next
and press E
NTER
to continue. The Prepare for
Management Contact window opens.
Contacting the Management Server
If you imported the initial configuration from a USB stick, most of the
information in the Prepare for Management Contact window is filled in.
This task has two parts. First, you activate an initial configuration on the
firewall.
• The initial configuration contains the information that the engine
needs to connect to the Management Server for the first time.
• The initial configuration is replaced with a working configuration when
you install a Firewall Policy from the Management Server on this
engine using the Management Client.
Note –
The Management interface must be the same that you
configured as the Primary Control Interface for the corresponding
Firewall element in the Management Center. You cannot select the
WLAN (wireless) interface as the Management interface.
3
