Initial Configuration
21
To activate the initial configuration
1.
Highlight
Switch Firewall Node to Initial Configuration
and press
spacebar to activate.
2.
Fill in the details according to your environment. The information
must match what you defined for the Firewall element (Primary
Control IP Address).
•
If the engine and the Management Server are on the same
network, you can leave the
Gateway to Management
field empty.
The initial configuration contains a simple firewall policy that allows only
administration-related connections and blocks everything else.
In the second part of the configuration, you define the information
needed for establishing a trust relationship between the engine and the
Management Server.
To fill in the Management Server information
1.
Highlight
Contact Management Server
and press spacebar to
activate.
2.
Fill in the Management Server IP address and the one-time
password that was created for this engine when you saved the
initial configuration.
•
If you do not have a one-time password for this firewall, see the
Firewall/VPN Installation Guide
for instructions on how to save an
initial configuration.
1
2
1
4
3
2
