28
Conformity Marks
Ethernet 0
If attempts to connect to the Installation Server through the 3G modem
and through the DSL port fail, the appliance tries to connect to the
Installation Server through Ethernet port 0. In the Management Client,
the corresponding Physical Interface must have a dynamic IPv4 address.
C o n fo r m i t y M a r k s
CE Marking
The following conformity mark is added to the appliance in accordance
to 2004/108/EC:
FCC Marking
The following conformity mark is added to the appliance in accordance
with FCC Part 15 regulations:
C o m p l i a n c e I n fo r m a t i o n
This section contains information on the FW-105 models that have
wireless support and the compliance of these appliances with the EMC
directive (2004/108/EC), and the FCC standard (FCC Part 15) for
wireless devices that are meant for home and office use.
This information is valid for all dual band products (2,4 GHz, IEEE
802.11b/g/n, and 5 GHz, IEEE 802.11n).
Applied Technologies
Radio spectrum:
• Sub-bands 2400 - 2483,5 MHz, 5150 - 5250 MHz, 5250 - 5350 MHz,
and 5470 - 5725 MHz
