46
Maintenance Operations
Replacing Power Supply Modules
You can use both AC and DC power supply modules in the appliance. If
necessary, you can replace a power supply module with a new one.
To replace a power supply module
1.
Unplug the power cord from the DC power supply module or
disconnect the wires from the AC power supply module.
2.
Locate the release tab on the left side of the power supply.
3.
Push the release tab to the right to release the power supply from
its locking position.
4.
Pull out the power supply using the handle provided.
5.
Replace the power supply with a new one.
6.
Push the power supply into the power bay until you hear a click.
Caution –
Do not open the casing of a power supply. Power supplies
can only be accessed and serviced by a qualified technician from the
manufacturer.
Release Tab
Handle
