Safety Precautions
7
Laser Precautions
Class 1 Laser Product
Operating Precautions
Care must be taken to assure that the appliance cover is in place when
the appliance is operating to ensure proper cooling. If this rule is not
strictly followed, the warranty may become void. Do not open the power
supply casing. Read the
(page 5) before you conduct
any installation or maintenance operations on the appliance.
Operating and Storage Temperatures
The allowed operating temperature of the appliance is +5...+35ºC. The
allowed storage temperature is -20...+65ºC. Do not operate or store the
appliance in temperatures outside these limits. If the appliance or the
interface modules have been stored in temperatures below 0ºC or above
+40ºC, allow 2 hours to bring the appliance and the interface modules
to normal operating temperature before turning on the appliance.
Otherwise, the appliance or the interface modules may be damaged.
Lithium Battery Precautions
For California:
Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/
hazardouswaste/perchlorate.
This notice is required by California Code of Regulations, Title 22,
Division 4.5, Chapter 33: Best Management Practices for Perchlorate
Materials. This product/part includes a battery that contains Perchlorate
material.
Caution –
Invisible laser radiation is emitted from the end of the fiber-
optic cable and from the aperture of the port when no fiber cable is
connected. Do not stare into the beam and avoid direct exposure to
the beam.
Caution –
The battery must be replaced by authorized service
personnel only. There is a risk of explosion if the battery is incorrectly
replaced. The replacement battery must be the same as or the
equivalent to the type recommended by the manufacturer. Used
batteries must be discarded according to the manufacturer’s
instructions. Short-circuiting the battery may heat the battery and
cause severe injuries.
