Rack-Mounting 15
Installing the Appliance Into a Two-Post Rack
To install the appliance into a two-post rack
1.
Locate the two rack-mounting brackets that are meant for the two-
post rack installation.
2.
Locate the three pairs of supports on the side of the appliance
and the corresponding holes on the brackets.
3.
Align the holes against the two supports towards the rear of the
appliance and push the bracket under the supports.
•
The brackets are marked with “L” for left and “R” for right.
4.
Secure the bracket to the appliance by inserting a screw through
the hole at the end of the bracket (see the illustration above).
5.
Repeat steps 3 and 4 on the other side of the appliance.
6.
Attach each bracket to the rack with two screws through the holes
in the front of the bracket.
Proceed to
