28
Configuring the Appliance
Setting the System Time
The system time must be set correctly for proper operation (used for
example, in Access rules, certificate validity checking, and log entries).
To set the system time
1.
Expand
Hardware
in the menu on the left and select
System Time
.
2.
Select the correct
Time Zone
and click
Save
.
3.
Change the time in the
System Time
section and click
Apply
.
4.
Synchronize the times by clicking
Copy from system time
.
Configuring Interfaces
You must add at least one interface in addition to the management port
to offer services to your users (a typical configuration requires two or
more additional interfaces). If you plan to create a pair of mirrored
appliances, we recommend using the port eth0_1 on the appliances’
back panel for communications between the pair of mirrored appliances.
See the
SSL VPN Administrator’s Guide
for instructions on how to set up
a mirrored pair.
1
2
3
4
