Initial Configuration
25
Contacting the Management Server
The Prepare for Management Contact window opens. If the initial
configuration was imported in the configuration wizard, most of this
information is filled in.
This task has two parts. First, you activate an initial configuration on the
firewall.
• The initial configuration contains the information that the engine
needs to connect to the Management Server for the first time.
• The initial configuration is replaced with a working configuration when
you install a Firewall Policy from the Management Server on this
engine using the Management Client.
T
To activate the initial configuration
1.
Highlight
Switch Firewall Node to Initial Configuration
and press
spacebar to activate.
2.
Fill in according to your environment. The information must match
what you defined for the Firewall element (Primary Control IP
Address).
•
If the engine and the Management Server are on the same
network, you can leave the
Gateway to management
field empty.
The initial configuration contains a simple firewall policy that allows only
administration-related connections and blocks everything else.
In the second part of the configuration, you define the information
needed for establishing a connection between the engine and the
Management Server.
1
2
