Thank you for purchasing the Storable Solutions Film & Foil
Cutter Set. Your items will perform best when used as
intended. To ensure the best performance of your products,
please consistently follow these instructions.
YOUR FILM & FOIL CUTTER SET INCLUDES:
USING YOUR FILM & FOIL CUTTER
•
Your film and foil cutters fit most plastic film and foil rolls up
to 100 square feet.
•
First, open the cutter and remove the 2 spindles located on
each side of the cutter. See arrows below.
•
Place one spindle into each end of your film or foil and
securely return the spindles to their corresponding corners
inside the cutter. Choose the open slot that fits your film/foil
roll best and allows it to spin easily.
•
Please note: Load your film or foil roll to feed from
underneath as opposed to over the top (see picture 3).
•
Pull the desired length of your film or foil and hold it as you
push down on the top of the cutter. Always ensure your
fingers are safely away from blade inside the cutter before
pushing down on the top.
•
Repeat the process until you have the desired amount of cut
film or foil.
CLEANING YOUR FILM & FOIL CUTTER
•
To clean your film & foil cutters, you can simply wipe the
outside and inside with a damp cloth.
•
Always ensure your cutters are completely dry before storing
or placing any film/foil inside.
2 FILM & FOIL CUTTERS
WARNING: Use caution when using your film & foil cutter
as interior blade is sharp.
GETTING STARTED
•
Before using, remove any labels, wraps, and any other
packaging.
•
Please note: Due to their design, it is normal for your
cutters not to close completely.
