InfoStation User Interface
19
InfoStation User's Guide - Rev. B01
StorCase Technology, Inc.
SAF-TE Processor Board SCSI ID Set-Up
NOTE:
Only necessary if the optional SAF-TE processor board is installed.
The following steps show how to change the SAF-TE processor board SCSI ID.
NOTE:
Press
CANCEL
at anytime to exit the menu system and return to the Default Display.
The menu system will automatically cancel after 15 seconds of User inactivity.
NOTE:
The SAF-TE processor board SCSI ID can be changed anytime. However, it will only
take effect after a system power up.
1.
Press
ENTER
at the Default Display so that
display =
Status
.
2.
Press
DOWN
until display =
SAFT Cfg
.
3.
Press
ENTER
so that display =
SCSI ID
.
4.
Press
ENTER
again so that display =
SAFT1:xx
.
This is the current SAF-TE SCSI ID.
5.
Press
UP
or
DOWN
to change the SAF-TE pro-
cessor board SCSI ID.
6.
Press
ENTER
to accept the change.