InfoStation User Interface
21
InfoStation User's Guide - Rev. B01
StorCase Technology, Inc.
Enclosure ID Set-Up
The following steps show how to view and change the InfoStation Enclosure ID.
NOTE:
Press
CANCEL
at anytime to exit the menu system and return to the Default Display.
The menu system will automatically cancel after 15 seconds of User inactivity.
1.
Press
ENTER
at the Default Display so that
display =
Status
.
2.
Press
DOWN
until display
=
Setup
.
3.
Press
ENTER
so that display =
Alarm
.
4.
Press
DOWN
until display =
Enc. ID
.
5.
Press
ENTER
so that display =
Enc. ID=x
.
This is the current enclosure ID.
6.
Press
UP
or
DOWN
to change the enclosure ID
number.
7.
Press
ENTER
to accept the change.