22
InfoStation User Interface
StorCase Technology, Inc.
InfoStation User's Guide - Rev. B01
Serial Port Set-Up
The following steps show how to view and change the InfoStation serial port option.
NOTE:
Press
CANCEL
at anytime to exit the menu system and return to the Default Display.
The menu system will automatically cancel after 15 seconds of User inactivity.
NOTE:
Factory default is set to S.Port0.
S.Port0 = External Monitoring
S.Port1 = RAID Monitoring (use this setting for accessing the RAID Module via
the UIM Serial Port)
1.
Press
ENTER
at the Default Display so that
display =
Status
.
2.
Press
DOWN
until display =
Setup
.
3.
Press
ENTER
so that display =
Alarm
.
4.
Press
DOWN
until display =
Ser.Port
5.
Press
ENTER
so that display =
S-Port0
(or
S-Port1
).
This is the current serial port set-up.
6.
Press
UP
or
DOWN
to change the serial port
option.
7.
Press
ENTER
to accept the change.