Introduction
5
InfoStation 14-Bay FC User's Guide - Rev. B00
StorCase Technology, Inc.
Rear Panel
(Figure 3)
NOTE:
Blank plate (provided) must be installed if any module slot is left empty. Instal-
lation of the blank plate is necessary for proper cooling inside chassis.
Port Bypass Module "A"
(Figure 4)
-
InfoStation comes equipped with one (1) Port
Bypass (PBP) Module, for dual FC loop configurability.
Port Bypass Module "B" Option
- Allows the installation of an optional PBP
Module, for quad loop configurability. Refer to Appendix B for further information.
Power Supply/Blower Module(s)
- Depending on the model, either one (1) or
two (2) 650W redundant, hot swappable power supply modules. Each module
features overvoltage and overcurrent protection, total usage hours, and power
supply fault detection.
Each module also contains two (2) high-pressure, variable-speed blowers for ample
chassis cooling (79 CFM per module).
WARNING:
DO NOT USE MODULE HANDLES TO LIFT CHASSIS! These
handles are specifically designed for the installation and re-
moval of modules only!
Module LED(s) -
Green LED -
Steady glow indicates normal power supply operation.
No glow indicates no A/C power or abnormal DC voltage range.
Red LED -
Flashing indicates temperature or over/undervoltage condi-
tions.
Power Switch(es)
- Rocker switch(es) control power to the power supply
module(s).
A/C Power In
- Accepts U.S. and other available international standard power
cords.
Module Option
- Allows the installation of StorCase upgrade products such as an
optional SNMP upgrade module. Refer to Appendix B for further information.
