70
Proper use
This electrical tool is intended for use as a grinding machine;
it is suitable for dry grinding of wood, plastic, metal, stucco
and painted surfaces. Read all safety warnings, instructions,
illustrations and specifications supplied with this tool. Fai-
lure to respect all instructions indicated below can cause an
electric shock, fire and/or a serious accident.
Safety instructions
Do not use accessories that are not specifically designed for
the intended use of the tool or that have not been recommen-
ded by the manufacturer. The fact that an accessory can be
fixed to the tool does not imply that it can be used safely.
The rated speed of accessories must be at least equivalent to
the maximum speed of the tool. If operated at a greater speed
than the rated one, accessories may break and cause the ejec-
tion of chips.
The external diameter and thickness of accessories must be
appropriate to guarantee the protection and safety of the tool.
Accessories with incorrect dimensions cannot be adequately
protected or controlled.
The conformation of the accessories must be correctly
adapted to the spindle of the tool. The accessories equipped
with holes of the shaft that do not correspond to the assembly
components on the tool, will not remain in balance, they will
vibrate excessively and can cause a loss of control.
Do not use a damaged accessory. If the tool or accessory has
suffered a fall, examine any damages or install an accessory
Translation of the original instruction
