8
bEfoRE EVERY RIDE
Your STORCK-RADDAR pedelec has undergone numerous tests dur-
ing production and a final check has been carried out by your STORCK
dealer. Nevertheless, be sure to check the following points before every
ride to exclude any malfunctioning that may be due to the transport of
your STORCK-RADDAR pedelec or to the work a third person may have
performed on your STORCK-RADDAR pedelec before delivery:
1. Are the quick-release levers
(a)
or bolted connections of the front
and rear wheel properly closed and the bolts of the seat post and
other components accurately tightened?
For more information see chapter
“How to Use Quick-Releases”
of
your STORCK user manual mountain bike and the enclosed operat-
ing instructions.
2. Are the connections of the rechargeable battery, the control unit
and the motor correctly plugged
(b)
?
For more information see chapter
“Rechargeable battery”
and
“operation and Displays”
.
3. Is your battery fully charged
(c)
? Keep in mind to entirely recharge
the battery after every ride. You need not wait until the battery is
empty!
For more information see chapter
“charging the battery”
.
4. Does the control unit show all values
(d)
? Is there any error message
or warning on the control unit? Check the values are correct on
your control unit before every ride. Do not set off on your STORCK-
RADDAR pedelec when the control unit shows a warning.
This function is planned to be available with the new generation of
control units presumably introduced from model year 2012 on.
For more information see chapter
“operation and Displays”
.
a
b c
d
