G
Improperly closed quick-releases and other fastenings
(e+f)
can cause components of the STORCK-RADDAR pedelec to
come loose and result in serious accidents!
G
Do not use your STORCK-RADDAR pedelec, if it fails on one
of these points! Riding a defective STORCK-RADDAR pedelec
can result in serious accidents! If you are in doubt or if you
have any questions, contact your STORCK dealer.
G
During use your STORCK-RADDAR pedelec is undergoing
stress resulting from the surface of the road and through
the rider’s action. Due to these dynamic loads, the differ-
ent parts of your bicycle react with wear and fatigue. Please
check your STORCK-RADDAR pedelec regularly for wear
marks, scratches
(g)
, deformations, colour changes and any
indication of cracking. Components which have reached the
end of their service life may break without previous warning.
Let your dealer maintain and service your STORCK-RADDAR
pedelec regularly and in cases of doubt it is always best to
replace components.
afTER an accIDEnT
1. Check whether the wheels are still firmly fixed in the drop-outs
(h)
and whether the rims are still centred with respect to the frame or
fork. Spin the wheels and observe the gap either between brake
pads and rim sides or between frame and tyre.
If the width of the gap changes markedly and you have no way to
true the rim where you are, you will need to release the rim brake a
little so that the rim can run between the brake pads without touch-
ing them. Please note that in this case the brakes may not act as
powerfully as you are used to.
For more information see chapters
“brake system”
,
“How to Use
Quick-Releases”
and
“Wheels and Tyre Equipment”
of your
STORCK user manual mountain bike as well as the enclosed operat-
ing instructions.
11
e
f
g
h
