4. Make sure the saddle is not out of alignment using the top tube
or the bottom bracket shell as a reference. If necessary, open the
clamp, realign the saddle and retighten the clamp
(e)
.
For more information see chapters
“adjusting the bicycle to the
Rider”
,
“How to Use Quick-Releases”
of your STORCK user manual
mountain bike and the enclosed operating instructions.
5. Check the battery
(f+g)
. If the battery is no longer properly in its
mounting or shows any damage, do not use your STORCK-RADDAR
pedelec. A damaged battery can result in the STORCK-RADDAR
pedelec being suddenly without drive. Risk of accident! Damage to
the outer shell of the battery can result in water or moisture entry
and short circuits or electric shocks. The rechargable battery may
catch fire or even explode! In such a case, contact your STORCK
dealer immediately.
For more information see chapter
“Rechargeable battery”
.
6. Lift your STORCK-RADDAR pedelec up a few centimetres and let it
bounce onto the ground. If this causes any sort of noise, search for
loosened bolts or components. Retighten them, if necessary.
7. Check whether the values shown on the control unit are correct and
complete
(h)
. Do not use your STORCK-RADDAR pedelec, if the con-
trol unit shows an error message or a warning.
Do not set off on your STORCK-RADDAR pedelec when the control
unit shows a warning. In such a case, contact your STORCK dealer
immediately.
For more information see chapter
“operation and Displays”
.
13
e
f
g
h