Stage 4.
Push the seat into place with the notched
corners at the back so it rests on the metal
brackets and fix from underneath using
2 x 35mm screws for each bracket.
Stage 5.
Place the 2 roof panels together and fix on the
inside using the metal plates. Use 4 x 35mm
screws for each metal plate.
Stage 6.
Lift the assembled roof so it sits on the rebated
roof supports. Ensure each side has equal
overhang, then fix through the roof frame and
into the roof support beams. Secure using
1 x 70mm screw in each corner.
Stage 7.
Secure the finial to cover the joint of the roof
sections at the front of the arbour using
2 x 35mm screws.
