Storite Rite 4 Assembly Instructions Manual Download

Page: 1 / 8

If you need advice, call us FREE on 0800 807

433 or email us at info@storitesheds.co.nz

If you choose to vary from these instructions

your warranty will be impaired.

SLOPING ROOF SHED

2280mm wide x 1830mm depth x 1980 - 1830mm high

ASSEMBLY

INSTRUCTIONS

You should have two packages:

• 1 cardboard package with the sheeting

• 1 plastic wrapped package

Some parts have sharp edges and should be

handled very carefully. We recommend the use of

protective gloves and footwear when assembling.

DO NOT attempt to erect this shed in windy weather.

All dimensions are approximate.

rite

Tools required:

•

Battery or electric drill

•

3.3mm (1/8th inch) drill bit

•

Screwdriver and riveter

•

Tape measure

•

Ladder

•

Non-slip gloves, good shoes and goggles

•

A set of helping hands

Call 0508 454 873

for an installer near you

ASSEMBLY

INSTRUCTION

DVD

WITH ALL SHEDS

Summary of Contents for Rite 4









Search results

Summary of Contents for Rite 4

Reviews:

Related manuals for Rite 4

Brands by name

Popular brands

Storite Rite 4, Assembly Instructions Manual

Search results

Summary of Contents for Rite 4

Reviews:

Related manuals for Rite 4

Brands by name

Popular brands