SOFTWARE .03
Adjustment options
Key 1: UP
Pressing this key you can increase the parameter or parameter value or scroll the
parameter list.
Key 2: DOWN
Pressing this key you can decrease the parameter or parameter value or scroll the
parameter list. At alarm the buzzer function can be switched off with this key.
Key 3: (if available)
Different functions are assigned to this key by help of parameters, see parameter A83.
(Standby mode, direct switching of a contact, setpoint P1).
Key 4: SET
While SET key is pressed, the setpoint is indicated.
In addition, the SET key is used for setting parameters
Key 5: Standby
Different functions are assigned to this key by help of parameters, see parameter A82.
(Standby mode, direct switching of a contact, setpoint P1).
First control level:
Parameter setting of the control setpoint
If none of the keys is pressed, the display indicates the actual value of the temperature. Pressing
the SET key, the setpoint shows on the display.
If the setpoint is to be changed, the SET key is to be kept pressed while adjusting the setpoint with
the keys UP and DOWN.
Please note that the setpoint can only be changed within the set setpoint limits.
The setpoint S1’ (if available) can be adjusted in the same way. If setpoint S1’ is activated it is
indicated and relevant for the control in case of closed switching input.
Para-
meter
Function description
Adjustment range
Standard
setting
Custom
setting
S1
Setpoint
P4...P5
0.0°C
S1‘
If A33
≠
0 and A81=2 or 3:
setpoint at closed switching input
E1
-99...+99.9 K if A33=1
P4...P5, if A33=2
0.0°C/K
Summary of Contents for ST710-KHJV.03
Page 2: ......
