2200 Keyboard for Public Environments
Technical Manual
The content of this communication and/or document, including but not limited to images, specifications, designs, concepts and information is
confidential and is not to be used for any purpose or disclosed to a third party without the express and written consent of Keymat Technology Ltd.,
Copyright 2017. All rights reserved.
2200 Series Technical Manual Rev 2 May 2017.docx
www.storm-interface.com
Page 6 of 23
ON
OFF
1 2
3
4
5
6
7
8
Connection Options
USB
USB versions are fitted with a 2.5m USB 2.0 cable. Alternative functions are available for Windows Explorer & menus Keys,
Left/Left click and to disable/enable hidden function keys. To access these remove the pod lid from the back of the keyboard
The DIP switch (SW1), can be found on the PCB. Note: position of DIP #2 does not matter.
SW1
1
2
3
ON
Windows Explorer
and Menu Key
Left / Left Click
operation
Hidden keys
Disabled
OFF
Factory Default
Left / Right Click
operation
Hidden Keys
Enabled
PS2/USB
PS2 / USB versions are not supplied with cables.
The DIP switch (SW1), is on the PCB on the rear of the keyboard.
Select the correct settings for your cable/host (PS/2 or USB).
Plug in the keyboard cable molex connector
Connect the earth tag to the securing nut and tighten
Plug in the trackerball cable to P3
Connect the earth tag to the securing nut and tighten
If left-left click switch operation is required then fit the
supplied jumper over the two central pins of the trackball
Earth P3 Jumper
Fit the supplied trackerball cover and keyboard pod lid (ensure the 4 clips are engaged)
SW1
1
2
3
PS/2 Mode OFF
N/A
OFF
USB Mode
ON
N/A
ON
Default Switch Positions
SW
1
