StormPro
®
2100DC
Heavy Duty 12V DC Pump
OPERATION MANUAL
Dated: 03/15/2013
Document Name: StormPro_2100DC_OM
Page 1 of 8
Register your product at www.sumpro.com
S
afety
I
nStructIonS
Read and save these instructions. This manual
contains important instructions. Failure to heed safety
instructions and warnings could result in injury or
death.
Read all the instructions before installing or using
the StormPro
®
2100DC. Always disconnect batteries
and disconnect StormPro
®
2100DC from the AC
power source before storing, handling, or making any
adjustments to the unit.
Use StormPro
®
2100DC only as described in this
manual. Any other use not recommended by the
manufacturer may cause fire, electric shock, or injury
to persons.
CAUTION:
Do not sit or stand on StormPro
®
2100DC. Keep children away.
CAUTION:
Do not place objects on Stormpro
2100-DC or allow vents to become blocked.
CAUTION:
Do not smoke, use sparkable
electrical devices, or open flame when
working on this unit!
CAUTION:
Do not install StormPro
®
2100DC
in locations classified as hazardous per
N.E.C., ANSIINFPA 70 - 1984.
WARNING:
Electrical shock hazard. This unit
has not been evaluated for use outdoors.
Never operate StormPro
®
2100DC outdoors.
Never operate StormPro
®
2100DC with battery
enclosure open.
Never operate StormPro
®
2100DC in a wet location.
Never operate StormPro
®
2100DC in a location where
liquid or moisture will come in contact with, splash on,
or drip on unit.
Do not insert or allow foreign objects to enter any
ventilation or exhaust opening as this may cause
electric shock, and/or a fire hazard.
WARNING:
Risk of electrical shock. In the
event of a short circuit, grounding reduces
the risk of shock by providing an escape wire for the
electrical current. The StormPro
®
2100DC must be
properly grounded.
The StormPro
®
2100DC is equipped with a cord
having a grounding wire with an appropriate
grounding plug. The plug must be used with an outlet
that has been installed and grounded in accordance
with all local codes and ordinances. The outlet must
be the same configuration as the plug. Where a two-
prong wall outlet is encountered, it must be replaced;
contact a qualified electrician. To reduce the risk of
electric shock, the grounding plug must not be cut off
the plug. Do not use the three-prong plug with a two-
prong adapter. Do not attempt to defeat this safety
feature.
Use the StormPro
®
2100DC only with adequate wiring
that is up to code. Connect to properly grounded
outlets only.
WARNING:
Risk of electrical shock. The
StormPro
®
2100DC is capable of and intended
to generate electrical current when unplugged from the
wall outlet or when the AC power is shut off.
Because the StormPro
®
2100DC uses batteries to
generate 120 volts of AC current, both the batteries
and the power cord must be disconnected to neutralize
the StormPro
®
2100DC . Failure to disconnect both the
batteries and the power cord could result in electrical
shock sufficient to cause injury or death.
