StormPro
®
BA
Series
Sump Pump
OPERATION MANUAL
Dated: 02/15/2013
Document Name: StormPro_BASeries_OM
Page 5 of 8
Register your product at www.sumpro.com
W
arranty
r
egIstratIon
c
ard
Please fill out and send back to: Metropolitan Ind. Warranty Department P.O. Box 7266 Romeoville, IL 60446. Or
to register online, go to www.sumpro.com
StormPro
®
BA Series Warranty Registration Card
To register your purchase, please fill in the following information:
Name:
Address:
City
Purchased From:
Installed By:
Phone:
Date:
State:
Zip:
W
arranty
VoId
If
...
The following may cause severe damage to pump and will void the warranty:
1. Using an extension cord.
2. Power cord has been cut or altered.
3.
Cutting off the ground pin or using an adapter fitting.
4. Working on pump or switch while plugged in.
5.
Removing motor housing, unscrewing impeller, or otherwise removing impeller seal
6. Running the pump continuously.
7. Pumping chemicals or corrosive liquids.
8.
Pumping gasoline or other flammable liquids.
9. Removing cord tags.
10. Pump will be inadequate if suspension liquids contain solid particles larger than the strainer’s holes.
