Page 5 /59
snengde_installation-product-SN-range v1.2 - Copyright Netasq 2015
PRESENTATION AND INSTALLATION GUIDE – SN RANGE
FOREWORD
The responsibility of NETASQ for any direct damage is limited to the amount received by NETASQ for
the purchase of the Product that actually caused the damage.
In no event can NETASQ be held responsible for damage indirectly related to the use of the Product(s),
including any operating losses due to an interruption in service or any other cause, suffered by the
Customer or by any other third parties, even if NETASQ has been advised of the possibility of such
damage.
NETASQ can in no way be held responsible for any loss of data or revenue, as well as any particular,
incidental, consequential or indirect damage arising from the use of the Product(s) and its associated
documentation.
3)
The Customer is solely responsible for ensuring that the Product(s) meet(s) his or her needs.
4)
NETASQ does not guarantee that the use of the Product(s) can be uninterrupted or free of any errors.
5)
Similarly, NETASQ disclaims any liability for improper installation, setup, configuration and/or
improper use of the Product(s). NETASQ does not guarantee use by the Customer that does not
comply with the prerequisites and conditions of use described herein. The same holds for all the
consequences of an action, inaction, error, omission or default attributed to the Customer or any
service provider commissioned by the Customer. All of the installation, setup and configuration tasks
must be performed by the Customer according to the state of the art and the regulations in force.
When the Customer or any service provider commissioned by the Customer takes the initiative to
download, launch, install or perform any other procedure for updating the Product(s), NETASQ cannot
be responsible for the Customer's failure to activate the updates or for failure to do so by any service
provider authorized by the Customer.
The Customer or any service provider commissioned by the Customer must comply with the
requirements of the documentation for the installation of the Product(s), including the safety rules,
precautions for installation and the prerequisites for connections that are communicated herein. The
Customer shall be held exclusively responsible for any failure to comply with these rules.
6)
Furthermore, the Customer shall be held exclusively responsible for any fraudulent or illegal use of
the Product(s), including any such use by its agents or service provider commissioned by the
Customer, both with regard to that of NETASQ as well as third parties who have suffered damage due
to this fact.
