Tel: +44 (0) 1279 419913
www.stortech.co.uk
Whilst every effort has been made to ensure the
accuracy of the information provided, no liability can
be undertaken for any errors or omissions. All
dimensions stated in this document are approximate.
Stortech Electronics Ltd reserves the right to alter the
specifications and introduce changes without prior
notice. © Stortech Electronics 2017
MDVR800_Quick Guide 0507 2017
MDVR800 Series
5.2 Hard Disk Box Installation Instructions:
1. Turn over the hard disk box; dismantle 4 screws in the side and underside, as
shown in <Figure 1>.
2. Install 4 screws on 2.5inch hard disk; remove the hard disk box from one side
bracket, as shown in <Figure 2>.
3. First connect SATA flat cable with hard disk , then insert the 4 braces into both
sides of the bracket damping rubber ring hole, then fix 2 screws on the bracket, as
shown <Figure 3>.
4. After installing hard disk box, fixed screws tightened hard disk, and lock the hard
disk lock.
Attention
：
After a new hard disk is inserted into the DVR, the DVR will automatically format the
storage device to pre-allocate the storage space. The loading time of the device in
the first instance can takes 2-3 minutes but provides a very robust recording
database.
