Tel: +44 (0) 1279 419913
www.stortech.co.uk
Whilst every effort has been made to ensure the
accuracy of the information provided, no liability can
be undertaken for any errors or omissions. All
dimensions stated in this document are approximate.
Stortech Electronics Ltd reserves the right to alter the
specifications and introduce changes without prior
notice. © Stortech Electronics 2017
MDVR800_Quick Guide 0507 2017
MDVR800 Series
2. Front Panel
1. HDD Lock, is used to remove the hard disk
Device will power off automatically if the power is on and the HDD lock is opened.
2. HDD Fixed Screw.
Please manually tighten screw after installing hard disk drive to prevent HDD being pulled out.
3.
Status Indicator LED. Details as below:
•
PWR — Power Indicator LED. LED light means system has powered on.
•
GPS — GPS/BD Status indicator light. LED ON—positioning success,
•
LED FLASH—GPS OK, LED OFF—No GPS Module.
•
HOT—Hard disk temperature warning LED.
•
SD — SD card Indicator LED. LED ON—Card is recording, LED FLASH—Card exists but is not
recording.
•
HDD — HDD Indicator LED. LED ON—HDD is recording, LED FLASH—HDD exists but not
recording.
•
LED OFF—HDD does not exist.
•
REC — Video Recording Indicator LED. LED ON—System is recording.
•
ALM — Alarm Indicator LED. LED ON — In alarm.
•
NET — Network Indicator LED. It changes depending on dial-up connection status, details are
as below.
•
LED OFF—No communication module, LED INTERMITTENT FLASH—SIM CARD does not
exist.
•
LED QUICK FLASH (1:1) —Device is dialling, LED SLOW FLASH (3:1)—server connection is not
available.
•
LED ON - server connection is successful.
4.
SIM Card and SD Card Slot; (When installing please install contact side down)
5.
Front audio and video output interface.
6.
Infrared remote control receiver.
7.
USB Interface
，
It’s used to import
or export data, recordings or firmware upgrade.
