Application
Instructions for use • C-MAC Monitor • NDQ566_EN_V1.0_02-2021_IFU_CE-MDR
33
Acknowledging warning message
Press the control button next to the warning message.
ð
The symbol for the critical situation disappears. The
Wrench
symbol appears.
6.6 Switching the monitor to standby mode
Standby mode enables the monitor to be quickly ready for operation again in the event of brief
interruptions.
Press the
On/Off
button briefly.
ð
The green status LED flashes.
ð
The monitor switches to standby mode. After 5 minutes in standby mode, the monitor
switches off.
The monitor switches to standby mode after 20 minutes of inactivity.
6.7 Switching off the monitor
Pressing the
On/Off
button longer turns the monitor off.
Keep the
On/Off
button pressed until the progress bar is complete.
ð
The green operating pilot lamp extinguishes.