Application
Instructions for use • C-MAC Monitor • NDQ566_EN_V1.0_02-2021_IFU_CE-MDR
34
ð
The monitor is switched off.
6.8 Performing a reset
If the device stops responding although connections and power supply are in order, a system
error has occurred and a system reset must be carried out.
The reset switch is located in a recess to protect it from unintentional activation.
1.
Insert a ballpoint pen or similar into the reset switch next to the SD slot and carefully
push downwards.
Or
Keep the
On/Off
button pressed for at least 10 seconds.
ð
The system is being reset.
2.
Switch on the device again with the
On/Off
button.
