Programmer / Clock
Semi-automatic cooking
There are two types of semi automatic
cooking available on this appliance.
The oven must be switched on, and in
use to use either of these functions
successfully.
The Duration method allows you to set
the oven for a specific length of time.
If a dish needed 2 hours to cook, then
it would be possible for you to set the
oven to turn off 2 hours later. This
allows you to be sure that your food
will be cooked for a set length of time
and no longer.
The End Time method allows you to
enter a specific time when you would
like the oven to switch off. If you wish
to leave the oven unattended, then it
offers peace of mind that the oven will
have turned itself off at the set time.
However, once the program is set then
it cannot be adjusted. Extra time can-
not be added, nor can the end time be
extended.
To cancel the semi automatic pro-
grams, press both the Plus and Minus
buttons together. This can be done at
any time during the cooking process.
Then if necessary, re program.
For the instructions on how to use both
of these functions, please see the fol-
lowing page.
Fully automatic cooking
This function incorporates both a dura-
tion and an end time and is meant to be
used when you wish to delay the start
time.
We recommend that the first few times
this function is used you are in the
house, this will familiarise you with your
oven and prevents food from being over
cooked or under cooked.
Care must be taken when selecting
foods for this function, it is not recom-
mended for certain food items which
may spoil, or are sensitive to being left.
It is also advisable to set the end time to
be as close to your return as possible to
prevent food being left standing.
19
27007 01 - P1 600EF 28/8/07 11:46 Page 21