C a u t i o n :
Any cleaning agent
used incorrectly may damage
the appliance.
Always let the cooker cool
before cleaning.
Some cooking operations generate
considerable amount of grease, this
combined with spillage can become a
hazard if allowed to accumulate on
the cooker through lack of cleaning.
In extreme cases this may amount to
misuse of the appliance and could
invalidate your guarantee.
It is recommended that the appliance
is cleaned after open roasting.
Do not use caustic pastes, abrasive
cleaning powders, coarse wire wool
or any hard implements, as they will
damage the surfaces.
All parts of the appliance can be safely
cleaned with a cloth wrung out in hot
soapy water.
Painted, plastic & metal finish
parts
(where fitted)
OVEN DOOR FRAME
&
HANDLE
,
GRILL PAN
HANDLE
,
FACIA PANEL
&
CONTROL KNOBS
Only use a clean cloth wrung out in
hot soapy water. Take care when
cleaning over the symbols on the fas-
cia panel.
Burner caps and heads
Important:
Allow burners to cool
before cleaning.
Caution:
Hotplate burners can be
damaged by soaking, automatic
dishwashers (or dishwasher powders
/ liquids), caustic pastes, hard
implements, coarse wire wool, and
abrasive cleaning pastes.
Clean with a moist soapy pad - eg;
“Brillo”.
For the burners to work safely, the slots
in the burner head where the flames
burn need to be kept clear of deposit.
Clean with a nylon brush, rinse, and
dry thoroughly.
Important:
The burner caps and
heads must be repositioned correctly
so that they sit squarely onto the hob
as shown.
23
incorrect
burner cap not central
incorrect
angled
correct
parallel
burner cap
burner head
CLEANING
08 27241 01-61TGDO 1/7/05 9:10 AM Page 25