Using The Programmer / Clock
Important: Remove food
as soon as it has cooked.
!!
!
10
11
12
13
Cook time
End time
Minute minder
Set time of day
Symbol ‘Quick Guide
For best results when
using the programmers
touch controls - touch
and then remove your
fingertip quickly and
lightly - unless the
instruction states other-
wise.
i
Setting the End Time
1. Repeatedly touch the clock screen until symbol
10
lights
up.
2. The current time of day appears on the clock screen,
this is adjusted by touching and holding the “+” symbol
until you have the hour, and minutes past that you
require. Using the “–” will also adjust the time if you
go past the time you want.
3. The clock beeps twice, the current time is displayed
and symbol
10
lights up permanently to indicate that
the oven will switch off automatically.
4. Select a cooking function and temperature - to set the
oven function and temperature please refer to the
‘Using Your Oven’
section. The clock will beep twice.
5. When the set time is reached, the oven turns off, the
alarm sounds and symbol
10
flashes.
6. Touch any main oven icon to silence the alarm.
You can consult the finishing time when required by
repeatedly touching the clock screen until symbol
10
flashes.
You can also modify it at this point by touching “+” or
“–” the clock beeps twice to confirm the change.
This function can be used even when you are already
using the oven. To do this, follow the instructions indi-
cated above except point number 4.
11
