Care and Cleaning
Caution
Before carrying out any
work, the appliance must
be disconnected from the
electricity supply.
!!
!
The inside of the oven should be cleaned to remove any
deposits (food spillage etc) which can give off smoke or
odours and cause stains to appear.
Allow the oven to cool before cleaning
For enamelled surfaces (e.g. the floor of the oven) use
a nylon brush or sponge with warm soapy water. If
using specialist oven cleaning products, use only on
enamelled surfaces and follow the manufacturer’s
instructions.
Clean the outside of the oven and the accessories with
warm soapy water or with a mild detergent.
When cleaning stainless steel parts, use soft cloths or
sponges to avoid scratching the stainless steel. If
using stainless steel cleaners, always follow the instruc-
tions on the packaging.
Cautions
Do not
clean the inside of your oven with a steam
cleaners or pressurised water.
Do not
use either metallic scouring pads or any mate-
rial that could scratch the appliance.
For your own safety,
never
switch the oven on without
the back panel that covers the fan.
Do not
remove the control knobs when cleaning the
outside of the oven.
Instructions for Removing the Supports and the
Back Panel.
Remove the accessories from inside the oven.
Ease out the supports (D), releasing them from the
bolt (E)
To disassemble the back panel, remove screw (F).
Reassemble in reverse order.
D
E
F
26